YN30E type hand-held internal combustion rock drill machine YN30E type drilling machines, hand-held internal combustion rock drilling machine, handheld drilling machine, internal combustion rock drill YN30E type rock drill manufacturers, YN30E type rock drill price JSD-WX Shandong Gast [JSD] mining equipment machinery factory fully equipped, technology force, advanced production technology, detection means perfect. Creating quality, with strength and with the quality of customer feedback! Handheld YN30E type internal combustion rock drill Handheld YN30E type internal combustion rock drill is a combination of a small gasoline engine, compressor, rock drill Trinity jackhammer tool. 2, operating by itself compressed air to wash the eyes of rock powder guns. 3, Weight only 30KG, easy to carry, suitable for alpine, no power, no wind pressure equipment areas, greater mobility of temporary works particularly suitable. 4, a hole in the rock, can be vertically downward, horizontal, up less than 45 ° vertically down the deepest hole to a depth of 6m. The The 5, YN30E the non-contact electronic ignition system, easy to start, difficult to damage, and long life to the next level than YN30A. 6, the machine uses the packaging for export, the indicators have reached the export standard. Uses: 1, This machine is suitable for rock perforated If the replacement of small parts can be changed to a crusher and tamping machine, used to carry out a variety of crushing, chipping, digging, splitting, tamping work. 2, both in the mountains, plains; regardless of the intense heat of +40 ° C or -40 ° C cold regions, can work. This machine has a wide range of adaptability. Technical specifications: outline Dimensions L x W x H 760x335x235 Engine type single-cylinder air-cooled two-stroke gasoline engine carburetor type float-type ignition SCR non-contact system engine displacement of 185 cm3 engine load speed (in chisel five-hole Determination) 2700 to 3000 r / min engine idle speed ≤ 2200 r / min Rod idling speed of 180 r / min brazing shank size drill rod tail hex the 22x108 mm impact energy ≥ 20J Drilling speed (average of the five-hole) ≥ 200 mm / min the largest perforator elevation angle of 45 ° perforated deepest depth of ≥ 6 m Fuel tank capacity ≥ 1.65 L fuel consumption (measured chisel the five-hole) ≤ 0.13 L / m gasoline and lubricating oil mixing ratio (by volume) 12:1